Din Rail Terminal Block 2.5mm 2pole Double Layer
Basic Information
IEC Data
UL Data
Material Data
Basic Information
| SUPU ID | TCD2.5-2-GY |
| Pitch | 5.2mm |
| Number of levels | 1 |
| Number of connections | 2P |
| Connection method | Cage spring wiring |
| Protection Level | IP20 |
| Work temperature | -40~+105℃ |
IEC Data
| Rated Current | 24A |
| Rated Voltage | 800V |
| Overvoltage category | Ⅲ |
| Pollution degree | 3 |
| Rated impulse voltage | 8.0KV |
| Conductor cross section solid | 0.2-4mm² |
| Conductor cross section flexible | 0.2-2.5mm² |
| Conductor cross section flexible,with furrule | 0.2-2.5mm² |
| Stripping length | 8-10mm |
UL Data
| Use group | B | C | D |
| Rated Current | 20A | 20A | |
| Rated Voltage | 600V | 600V | |
| Rated cross section | 24-12AWG |
Material Data
| Insulation material | PA66 |
| Insulation material group | Ⅰ |
| Flame retardant grade, UL94 compliance | V0 |
| Contact material | Copper alloy |
| Surface characteristics | Sn,Plated |
Installation Method
1. Mounting terminals: After placing the terminal inactive foot on the side of the guide rail, press down another side of moving foot to complete the installation.
2. Connecting the external wiring: First press the screwdriver down until the spring is fully opened, then insert the wire that needs to be connected to the corresponding inlet hole, and finally pull out the screwdriver complete the connection of the wire.
Features
SUPU TC series spring-cage terminal blocks adopt spring cage technology,it has the advantages of easy installation, high stability, and not easy to take off the wire.
SUPU TC series products can be connected to soft and hard wires within the rated wiring range and cold presser with furrule .The maximum wiring capacity is up to 10mm2 with anti-touch protection.
